|
|
|
|
RAM101 - 3' Fiber Optic Cable
This kit enables you to bring light to parts of your model where it is not practical or scale appropriate to mount LEDs. The kit includes 36 inches of fiber optic cable which provides a inchlight inch .040 in diameter and simple shrink tubes for connecting the cable to the RAM LEDs. The cable can be cut to lengths appropriate for any model.
St. Aubin's Sale Price
$9.98
|
|
|
|
|
|
|
|
|
|
|
RAM102 - Infra Red Switch
"This system uses infra red, eliminating magnets and minimum light requirements. It senses motion, such as a passing train, and switches devices up to 1/2 amp such as RAM digital sounds For convenient, trackside installation. the IR sender and receiver are each on 1 foot cables attached to the circuit board and powered by 5 to 24 volts D.C. "
St. Aubin's Sale Price
$19.99
|
|
|
|
|
|
|
|
|
|
|
RAM107 - Machinery w/2 inch Speaker
"This device provides the sounds of heavy machines, some rhythmic and others sporadic. See RAM 72 for full info. "
St. Aubin's Sale Price
$32.99
|
|
|
|
|
|
|
|
|
|
|
RAM109 - Sgl Headlight 5mm LED
"For HO to G this system uses a T1 3/4, 3/16 diameter (5MM) white LED on 1 foot of high quality #30 flexible wire connected to 5/16 inch x 5/8 inch x 1 inch circuit board. The system is complete and ready to install for low voltage track power Nothing extra to buy. "
St. Aubin's Sale Price
$12.99
|
|
|
|
|
|
|
|
|
|
|
RAM110 - Dbl Headlight 5mm LED
"All the same features of the RAM 109 but has two T1-3/4, white LEDs. "
St. Aubin's Sale Price
$14.99
|
|
|
|
|
|
|
|
|
|
|
RAM111 - Light Sensor
A small photo cell senses a passing train and switches devices up to 1/2 amp such as RAM digital sounds. Light sensitivity is adjustable on the 1 inch x 1 inch circuit board powered by 5 to 24 volts DC
St. Aubin's Sale Price
$11.99
|
|
|
|
|
|
|
|
|
|
|
RAM112 - Reed Switch w/Magnets
"A 1' reed switch is attached to 1' of wire to be triggered by a 5/16 high power, rare earth magnet. "
St. Aubin's Sale Price
$9.99
|
|
|
|
|
|
|
